The CDB model is the automated test device.
It impresses with its convenient operation and innovative software with automatic image capture and report management, making inspections more efficient and precise!
To determine the flame behavior of building and insulation materials, the burner, with a 20 mm high flame, is advanced to the test specimen via a PC-controlled automatic feed system and returned after the relevant flame exposure time. As it advances, the burner automatically swivels to the test position of 45°. An acoustic signal announces the end of the test time. The computer-controlled test sequence with image capture records the flame development with automatic evaluation and logging, as well as database-supported documentation. A thermocouple – the tip of which also serves as a gauge for setting the burner flame height – controls a safety valve that interrupts the gas supply if the burner flame is accidentally extinguished. Together with an emergency stop button, this device represents an essential element for device safety in accordance with the European Machinery Directive.
AT A GLANCE:
- TESTING DEVICE V: 10 or V: 11 with specimen holder
- BURNER SUPPORT motor-driven from the side
- BURNER according DIN 50051 or DIN EN ISO 11925-2: 2020
- COMBUSTION CHAMBER made of sheet steel with an austenitic structure
- PC with LED screen
- SOFTWARE for automatic image capture with automatic logging
Je nach Bedarf wählen Sie die entsprechende Prüfvorrichtungsversion:
V: 10
Test device V: 10
for mainly monolithic products
- test specimen can be swiveled 90° around the vertical axis
- specimen holder according to DIN EN ISO 11925-2: 2020 Fig. 3a)
(to test the vertical edge, the sample holder according to DIN EN ISO 11925-2: 2020 Fig. 3b) can optionally be used)
V: 11
Test device V: 11
for monolithic and multilayer products
- test specimen can be swiveled 90° around the vertical axis
- specimen holder according to DIN EN ISO 11925-2: 2020 Fig. 3a) and 3b)
- sliding device for convenient flaming of the vertical edges of multilayer products
The swivel arm and asymmetrical specimen holders allow for quick and easy specimen changes. By swiveling the specimens 90° around the vertical axis, they can be exposed to flames from the front and sides with minimal effort.
A sample holder according to DIN EN ISO 11925-2: 2020 fig. 3c) for loose fillers and other accessories are available as options.
Recommended location: Exhaust air extraction system (digestorium)
Space required: 1200 mm x 500 mm x 900 mm
